Artisan Communications specialize in integrated structure cabling solutions to support your business requirements. |
|||
 |
The principal owners have each been in the telecommunications field for over 20 years and have been quite fortunate to have installed for many of the largest company’s in the country. Having worked primarily in the New York Tri-state area, we have had the pleasure of using, installing and teaching some of the latest most cutting edge technology in the business. Because of this, we are confident that we are an asset to whomever we install for. |
||
Artisan and their employees have combined to work in and for a large number of companies a small example of these are as follows: Rockefeller Group, Colgate Palmolive, General Electric, NBC, Alliance Capital, Exxon, Columbia University, Yale University, Newark Airport, Drexel Burnham, Chase Manhattan, McGraw Hill, Simon and Shuster, Pearson Technologies, Radio City Music Hall, New Jersey department of Transportation, US Treasury, GE Space Center, and countless more. |
|||
| Artisan is fully insured and union affiliated (CWA Local 1109). We have worked and known all of our top men for over 10 years each and they are all skilled accomplished installers, each one is capable of running any size job or number of men to assure all work on structured cabling systems meet all ANSI/TAI/EAI Standards. They are quite adept at working with other trades, architects and GC’s and capable of conveying the needs of a project to assure all items are taken care of in a professional manner. |
|||
All Artisan employees can perform the following: Install, maintain, and service horizontal and vertical telecommunications and network cabling systems. This includes but does not limit to, all forms of twisted pair i.e. category 5, 5e, 6 and 6e. All forms of coaxial cabling i.e. cable TV, RG-6, 11, 58, 59, etc. All forms of fiber optic cable, multi or single mode fiber optic sub-duct, Speakers and paging systems. Install, splice, terminate and maintain large copper risers and feeds, as well as large fiber optic backbones. Terminate all types of twisted pair cabling and certify them to CAT 5, 5e and 6 specifications where applicable. Connect and splice all types of fiber optic cabling, single or multi mode, and certify for dB loss. Install all types of cable support system Such as: Ladder rack, cable trays, distribution frames, support rings and bags, as well as secure cable racks and cabinets to walls and floors where applicable. |
|||